filename: tfs 368a.doc version 1.1 25.04.2013 vectron international filter specification tfs 368a 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: input: 150 output: 150 characteristics remark: the nominal frequency f n is fixed at 368.64 mhz. the insertion loss a e is defined as loss value determined at f n. reference level for the relative attenuation a rel of the tfs 368a is the insertion loss a e . the centre frequency f c is the arithmetic mean value of the upper and lower frequencies at the 3 db filter attenuation level relative to the inserti on loss a e . all specified data are met within the operating t emperature range. d a t a typ. value tolerance / limit insertion loss a e 2.1 db max. 3.5 db (reference level) nominal frequency f n - 368.64 mhz centre frequency f c 368.64 mhz - bandwidth bw 3 db 13.3 mhz - relative attenuation a rel @ 92.16 mhz 70 db min. 50 db @ 184.32 mhz 66 db min. 50 db @ 276.48 mhz 64 db min. 48 db @ 460.80 mhz 59 db min. 47 db @ 552.96 mhz 60 db min. 48 db @ 645.12 mhz 58 db min. 47 db operating temperature range otr - - 40 c ... + 85c storage temperature range - - 45 c ... + 85c temperature coefficient of frequency tc f * -72 ppm/k - *) ? f(hz) = tc f (ppm/k) x (t-t 0 ) x f to (mhz). material: linbo3_64 black, so in principle pyrofree. generated: checked / approved:
filename: tfs 368a.doc version 1.1 25.04.2013 vectron international filter specification tfs 368a 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 1 2 3 5 6 7 4 8 1 ,0 +/-0,15 3 ,0 +/-0,15 0,6 +/-0,15 0,6 +/-0,15 0,6 +/-0,15 3 ,0 +/-0,15 6 0 1 3 7 5 date code 150 test circuit l1 saw l2 2 6 1, 3, 4, 5, 7, 8 368a d17 1 ground 2 input 3 ground 4 ground 5 ground 6 output 7 ground 8 ground date code: year + week d 2013 e 2014 f 2015 ... 19 89 159 229 299 369 439 509 579 649 719 -70 -63 -56 -49 -42 -35 -28 -21 -14 -7 0 frequency in mhz magnitude in db insertion loss: -2.05 db 358.64 360.64 362.64 364.64 366.64 368.64 370.64 372.64 374.64 376.64 378.64 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 frequency in mhz magnitude in db
filename: tfs 368a.doc version 1.1 25.04.2013 vectron international filter specification tfs 368a 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respe ctively, 1 octave per min, 10 cycles per plan, 3 pl ans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 1 0 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions refer to the attached " air reflow temperature conditions" on page 4; this filter is rohs compliant (2002/95/eg, 2005/618 /eg) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,3 0,1 reel (all dimensions in mm) a : 180 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 60 c : 13,0 0,2
filename: tfs 368a.doc version 1.1 25.04.2013 vectron international filter specification tfs 368a 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 368a.doc version 1.1 25.04.2013 vectron international filter specification tfs 368a 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 generation of development specification. sch?nbein 12.11.2012 1.1 generation of filter specification. sch?nbein 25.04.2013
|
